cart Shopping Cart SHOPPING CART: 0 items
01440

Digital Transfers

Digital Transfers
larger imageMove mouse over the image to magnify
Transfers for small runs of multicolored prints
Enquire
For multicolour transfers we suggest you try our  Digital Transfers. Perfect for small runs as set up charges are minimal and you can have as many colours as you like. We produce vibrant transfers, made from our lightweight Digi-Flex White. We also supply custom made Transfers in Digi-Flex Clear, Digi-Flex Sub Blocker, Digi-Flex Glow in the Dark and Digi-Flex Reflective.

We require vector artwork, AI, CDR, EPS, or PDF. Our preference is CDR. Please convert fonts to curves/paths or supply font files with your order. Vectored artwork is by far the best and easiest artwork to work with however, it is not possible with photographs are highly toned/ gradient filled graphics. If your supply Bitmap artwork, acceptable formats are JPG & TIF and most other common pixel based extensions. All Bitmap images must be at least 300 DPI at your requested print size.

Check our design and artwork specs on the link below, for pricing and ordering send us your artwork and we'll do the rest
 
  • Size of prints required
  • Quantity of prints required
  • Material and colour they would be branded on

ARTWORK + DESIGN - Click here for Design specs and requirements
 
how to use

HOW IT WORKS

Artwork is taken sized and colour matched as required. We then add a Cut-line or Cut-contour with either a .5mm Bleed or .25mm choke, this allows us to contour cut to the edge of a graphic leaving a clean finished result. We use a Roland Versacamm VS 300i which uses a CMYK process to creating colour. All files are best saved with CMYK values as this will be more practical and easy to match. When the graphic is printed it is NOT mirrored , the same machine cuts to the contour created. The excess is weeded away leaving only print on the carrier. A heat resistent Application Tape is required remove the print from its carrier and exposing the adhesive. The print is then ready to be applied onto your medium.
 
APPLICATION INSTRUCTIONS
 
  1. Set machine temp. To 165C
  2. Prepress garment for 5 seconds.
  3. Remove White beaded cover from transfer
  4. Place the transfer in position on the garment.
  5. Apply heat for 5-8 seconds, using light/ med.
  6. Cool for 1-2 seconds (maximum) then remove the backing paper .
  7. Repress using a teflon cover sheet for 3-4 seconds



 

You might also be interested in ...

Screen Printed Transfers
Enquire for price