cart Shopping Cart SHOPPING CART: 0 items
01397

Digi-Flex Clear

Digi-Flex Clear
larger imageMove mouse over the image to magnify
Printable Clear PU
Qty Description Price
Digi-Flex Clear $19.50
Full Roll $362.50
Application Tape $3.95
*DELIVERY GUIDE

PRICING AND PROMOTIONAL
 
Quantity Price- 500mm Roll Width
Up to 4 meters $19.50 per meter
5 to 9 meters $17.00 per meter
10 meters or more $14.50 per meter
Full Roll ( 25 Meters ) $362.50
 

DESCRIPTION
Digi-flex Clear is a lightweight polyurethane product used for producing multicolour Heat Transfers for apparel.  It is compatible with digital printers such as Roland and Mimaki that use Eco Solvent inks.
 
Digi-flex Clear provides a quality print surface that cuts and weeds easily and has a soft flexible polyurethane texture.
 
It should be used on white and light coloured garments only.
 
  • Environmentally Friendly
  • Elastic soft feel
  • High quality print surface
 
Once your transfer is printed, cut and weeded you must use a Masking Tape to remove the transfer for the carrier so that it can be applied to the garment.
 
See above to order Application Tape, this is an essential accessory to be able to complete the application process successfully.

Application tape can also be useful in preventing coloured inks from evaporating from printable heat transfers film which is exposed to air when kept for a period of time. The tape leaves no sticky residue after application. 
 
  • APPLICATION TAPE CAN ONLY BE BOUGHT IN CONJUNCTION WITH PRINTABLE MEDIA, THE SAME QUANTITY AS PRINTABLE MEDIA WILL BE REQUIRED TO CONTINUE PURCHASE AND CANNOT BE BOUGHT SEPARATELY
  • If no Application Tape is needed leave the field blank

Stahls  have a variety of printable media such as, Digi-Flex Sub Block/ Digi-Flex White/ Digi-Flex Reflective/ Digi-Flex Glow in the Dark
 

HOW TO USE

How to use DFWHITE

 
1. Setup graphics to print- with correct cut line
2. Print and cut graphics
3. Weed away excess media
4. Apply application tape or masking film over top
5. Remove graphics from carrier
6. Pre-press garment for 2-3 seconds.
7. Position graphics on garment
8. Heat press on medium pressure for 5-8 seconds
9. Allow print to cool and peel away carrier
10. Re-press using Teflon cover sheet for 3-5 seconds

 
Notes
You would need to use a cut line recognised by your print/ rip software, leave enough bleed or colour for the cut to move as it is being cut and for a accurate contour cut.
 
  • Always test cut prior to any production run. Printer/ Cutter settings  will need to be adjusted as the blade ages. For optimal  cutting and weeding, maintain a line thickness of at least  1/8” for lettering & logos.
 

TECH SPECS
 
Composition
COMPOSITION
DIGI-FLEX CLEAR PU
(Excluding 100 Micron PET Carrie): 85 MIC
(30 MIC. PU, 55 MIC. Hotmelt)
510mm(19.68") Roll Width
25M (27.34 YD) Per Roll
 
wash-948
WASH
Printed products can be machine or hand
washed at no more than 40 degrees Celsius.
should also be washed inside out.
 

 

You might also be interested in ...