cart Shopping Cart SHOPPING CART: 0 items
01462

Digi-Flex Reflective

Digi-Flex Reflective
larger imageMove mouse over the image to magnify
Printable Reflective PU
Qty Thumb Description Price
Click to swap image: Digi-Flex Reflective Digi-Flex Reflective $29.50
Click to swap image: Application Tape Application Tape $3.95
*DELIVERY GUIDE

PRICING AND PROMOTIONAL
 
Quantity Price- 500mm Roll Width
Up to 9 meters $29.50 per meter
10 plus meters $24.50 per meter
 

DESCRIPTION
Digi-flex Reflective is a lightweight product used for producing multi-colour Reflective Transfers for apparel.  It is compatible with printer cutters using Eco Solvent Inks such as Roland and Mimaki.
 
  • Environmentally friendly
  • Elastic & soft
  • Quality print surface
Once your transfer is printed, cut and weeded you must use a Masking Tape to remove the transfer for the carrier so that it can be applied to the garment.
 
See above to order Application Tape, this is an essential accessory to be able to complete the application process successfully.
When the designs are made, they are printed then cut to your desired contour; the excess media is weeded away. A clear masking tape is needed to remove the Graphics from its carrier so the transfer is ready for Application.
Application tape can also be useful in preventing coloured inks from evaporating from printable heat transfers film which is exposed to air when kept for a period of time. The tape leaves no sticky residue after application. 
 
  • APPLICATION TAPE CAN ONLY BE BOUGHT IN CONJUNCTION WITH PRINTABLE MEDIA, THE SAME QUANTITY AS PRINTABLE MEDIA WILL BE REQUIRED TO CONTINUE PURCHASE AND CANNOT BE BOUGHT SEPARATELY
  • If no Application Tape is needed leave the field blank
Stahls  have a variety of printable media such as, Digi-Flex Clear/ Digi-Flex Sub Block/ Digi-Flex White/ Digi-Flex Glow in the Dark
 

HOW TO USE

How to use DFGLOW

 
1. Setup graphics to print- with correct cut line
2. Print and cut graphics
3. Weed away excess media
4. Apply application tape or masking film over top
5. Remove graphics from carrier
6. Pre-press garment for 2-3 seconds.
7. Position graphics on garment
8. Heat press on medium pressure for 5-8 seconds
9. Allow print to cool and peel away carrier
10. Re-press using Teflon cover sheet for 3-5 seconds

 
Notes
You would need to use a cut line recognised by your print/ rip software, leave enough bleed or colour for the cut to move as it is being cut and for a accurate contour cut.
 
  • Always test cut prior to any production run. Printer/ Cutter settings  will need to be adjusted as the blade ages. For optimal  cutting and weeding, maintain a line thickness of at least  1/8” for lettering & logos.
 

TECH SPECS
 
Composition
COMPOSITION
DIGI-FLEX RELECTIVE
(Excluding 100 Micron PET Carrie): 85 MIC
(30 MIC. PU, 55 MIC. Hotmelt)
510mm(19.68") Roll Width
 
wash-948
WASH
Printed products can be machine or hand
washed at no more than 40 degrees Celsius.
should also be washed inside out.
 

 

You might also be interested in ...