DESCRIPTION
Digi-flex white is an excellent choice for Digital Heat Transfers. It is a Polyurethane, Eco friendly product and supports Eco Solvent Digital Printers-Cutters such as Roland and Mimaki. It provides a high quality printing surface, cuts and weeks easily and has a soft Polyurethane texture.
Environmentally Friendly
Elastic soft feel
High quality print surface
Once your transfer is printed, cut and weeded you must use a Masking Tape to remove the transfer for the carrier so that it can be applied to the garment.
See above to order Application Tape, this is an essential accessory to be able to complete the application process successfully.
Application tape can also be useful in preventing coloured inks from evaporating from printable heat transfers film which is exposed to air when kept for a period of time. The tape leaves no sticky residue after application.
APPLICATION TAPE CAN ONLY BE BOUGHT IN CONJUNCTION WITH PRINTABLE MEDIA, THE SAME QUANTITY AS PRINTABLE MEDIA WILL BE REQUIRED TO CONTINUE PURCHASE AND CANNOT BE BOUGHT SEPARATELY
If no Application Tape is needed leave the field blank
1. Setup graphics to print- with correct cut line
2. Print and cut graphics
3. Weed away excess media
4. Apply application tape or masking film over top
5. Remove graphics from carrier
6. Pre-press garment for 2-3 seconds.
7. Position graphics on garment
8. Heat press on medium pressure for 5-8 seconds
9. Allow print to cool and peel away carrier
10. Re-press using Teflon cover sheet for 3-5 seconds
Notes
You would need to use a cut line recognised by your print/ rip software, leave enough bleed or colour for the cut to move as it is being cut and for a accurate contour cut.
Always test cut prior to any production run. Printer/ Cutter settings will need to be adjusted as the blade ages. For optimal cutting and weeding, maintain a line thickness of at least 1/8” for lettering & logos.
TECH SPECS
COMPOSITION
DIGI-FLEX WHITE
(Excluding 100 Micron PET Carrie): 85 MIC
(30 MIC. PU, 55 MIC. Hotmelt)
500mm(19.68") Roll Width
25M (27.34 YD) Per Roll
WASH Printed products can be machine or hand washed at no more than 40 degrees Celsius. should also be washed inside out.
PRICING AND PROMOTIONAL
DESCRIPTION
Digi-flex white is an excellent choice for Digital Heat Transfers. It is a Polyurethane, Eco friendly product and supports Eco Solvent Digital Printers-Cutters such as Roland and Mimaki. It provides a high quality printing surface, cuts and weeks easily and has a soft Polyurethane texture.
- Environmentally Friendly
- Elastic soft feel
- High quality print surface
Once your transfer is printed, cut and weeded you must use a Masking Tape to remove the transfer for the carrier so that it can be applied to the garment.See above to order Application Tape, this is an essential accessory to be able to complete the application process successfully.
Application tape can also be useful in preventing coloured inks from evaporating from printable heat transfers film which is exposed to air when kept for a period of time. The tape leaves no sticky residue after application.
- APPLICATION TAPE CAN ONLY BE BOUGHT IN CONJUNCTION WITH PRINTABLE MEDIA, THE SAME QUANTITY AS PRINTABLE MEDIA WILL BE REQUIRED TO CONTINUE PURCHASE AND CANNOT BE BOUGHT SEPARATELY
- If no Application Tape is needed leave the field blank
Stahls have a variety of printable media such as, Digi-Flex Clear, Digi-Flex Sub Block, Digi-Flex Reflective,Digi-Flex Glow in the DarkHOW TO USE
2. Print and cut graphics
3. Weed away excess media
4. Apply application tape or masking film over top
5. Remove graphics from carrier
6. Pre-press garment for 2-3 seconds.
7. Position graphics on garment
8. Heat press on medium pressure for 5-8 seconds
9. Allow print to cool and peel away carrier
10. Re-press using Teflon cover sheet for 3-5 seconds
You would need to use a cut line recognised by your print/ rip software, leave enough bleed or colour for the cut to move as it is being cut and for a accurate contour cut.
TECH SPECS
COMPOSITION
(Excluding 100 Micron PET Carrie): 85 MIC
(30 MIC. PU, 55 MIC. Hotmelt)
500mm(19.68") Roll Width
25M (27.34 YD) Per Roll
WASH
Printed products can be machine or hand
washed at no more than 40 degrees Celsius.
should also be washed inside out.